A software interface where hardware can use Optical Analog/Digital hybrid random access memory
If you are going to use this with a Raspberry Pi with ADC then you will need the ADC driver.
If you are going to use this with an Arduino then you will need the Arduino driver.
You may want to run the tasks you want to do more than once because this type of hardware has not been perfected yet.
To run this application in your browser you will want to put the contents of the Analog_And_Digital_Bit_Hybrid_Interface version 1.2 folder or later in your web server directory and you will need a web server to run this application in your browser.
To build a Analog/Digital Hybrid bit of ram you take a laser diode and aim it at a photoresistor.
To use mod support you have to put the mod file in Analog_And_Digital_Bit_Hybrid_Interface version 2 folder or later and the mod must be called Analog_And_Digital_Hybrid_Bit_Interface_Mod.lua
GNU GPL v3.0 Conditional Exceptions to use MPL 2.0
If the following condition is met, the licensing rules for content covered by GNU GPL v3.0 are modified as described below:
Condition:
The developer is distributing, porting, or integrating the software with platforms or environments that impose requirements incompatible with GPL-3.0, including but not limited to:
Effect on licensing:
These exceptions apply only when the condition above is met.
contributors needed